Author

admin

Browsing

President Donald Trump and former President Barack Obama chatted about golf during a viral moment of bipartisanship during former President Jimmy Carter’s funeral in January, just days before Trump’s return to the Oval Office, a new book detailing the unprecedented 2024 election cycle reported. 

Trump and Obama were seen smiling and quietly chatting with one another in the pews of the Washington National Cathedral on Jan. 9, 2025, in a moment that spread like wildfire on social media as Americans sounded off with speculation over what the pair of presidents who had long traded political barbs were talking about. 

‘2024: How Trump Retook the White House and the Democrats Lost America,’ which was released Tuesday, said that Trump arrived in Washington for Carter’s funeral as a ‘conqueror’ following the November 2024 election and sat next to Obama for the funeral service. 

‘He’d attended Jimmy Carter’s funeral, walking into Washington not as a scourge but as a conqueror,’ the book reported of Trump. ‘He could ignore the speech on character by the outgoing president, and the cold shoulder from the vice president he’d defeated.’

‘Instead he sat next to Barack Obama and invited him to play golf, enticing him with descriptions of Trump’s courses around the world,’ the book continued of the pair’s conversation. ‘He was no longer an anomaly. He was being treated like an American president. He wanted to be remembered as a great one.’

Trump and Obama were seated near other high-profile former U.S. leaders, including former President George W. Bush, former Vice President Mike Pence, former President Bill Clinton, former first lady and Secretary of State Hillary Clinton, as well as then-President Joe Biden and then-Vice President Kamala Harris.

Social media commenters at the time remarked that footage and video clips of the pair were unexpected, and others joked that Obama may have voted for Trump despite years of the pair trading political barbs. 

‘Trump and Obama sitting next to each other was not on the 2025 bingo card,’ one social media user posted to X in January. 

‘Did Obama vote for Trump too?!’ Clay Travis, founder of sports and politics commentary platform OutKick, joked at the time. 

‘We need lip readers to see what Trump said to make Obama laugh,’ another person posted to X in January. 

Trump was asked about the viral moment ahead of his inauguration, remarking that he ‘didn’t realize how friendly it looked.’

‘I said, ‘Boy, they look like two people that like each other.’ And we probably do,’ Trump added at the time. ‘We have a little different philosophies, right? But we probably do. I don’t know. We just got along. But I got along with just about everybody.’

Fox News Digital’s Kristine Parks contributed to this report. 

This post appeared first on FOX NEWS

Senate Republicans are gearing up to claw back billions of dollars in foreign aid and public broadcasting funding, but dissent is brewing among some who could eat into President Donald Trump’s cut request.

A cohort of Senate Republicans are publicly and privately growing squeamish over the White House’s $9.4 billion rescissions package, which would slash $8.3 billion from the U.S. Agency for International Development (USAID) and over $1 billion from the Corporation for Public Broadcasting (CPB), the government-backed funding arm for NPR and PBS.

The cuts stem from Trump’s Department of Government Efficiency (DOGE), which was lauded by most Republicans for its mission to root out waste, fraud and abuse in the federal government.

Still, concerns and calls for changes are being made, in particular to proposed slashes to the President’s Emergency Plan for AIDS Relief (PEPFAR) and the public broadcasting fund.

Publicly, Sens. Susan Collins, R-Maine, Mike Rounds, R-S.D., and Lisa Murkowski, R-Alaska, have all aired their concerns about the House-passed bill and are eyeing changes that could see the cuts reduced.

‘I don’t like it as it is currently drafted,’ Murkowski said. ‘I’m a strong supporter of the Corporation for Public Broadcasting, and our health programs are important.’

Collins has raised issues with slashes to PEPFAR, an issue brought forth during a hearing with White House officials last month, while Rounds is worried about funding being slashed to rural radio stations, particularly for Native American populations in his state and others ‘and their ability to get good information during times of stress.’

Senate Republican leadership already has plans for an amendment process on the bill, which will likely culminate in another marathon vote-a-rama amendment session — roughly two weeks after the grueling amendment process for Trump’s ‘big, beautiful bill.’

Senate Majority Leader John Thune, R-S.D., said that he intended to put the package on the Senate floor next week, likely ahead of the Friday deadline for lawmakers to advance the clawbacks.

If the bill is amended, it would have to be sent back to the House before heading to Trump’s desk.

Sen. Markwayne Mullin, R-Okla., told Fox News Digital that he expected the vote-a-rama to begin Wednesday, and said the hope was that leadership would be able to address as many concerns among Republicans as possible before bringing the bill to the floor.

‘Whatever it takes, we’re having those conversations,’ he said. ‘The point is, once we get to the vote-a-rama, we want to have as much issues resolved so we know where we’re at on the floor without any surprises. And I think we can do that, maybe not, but I think we can. I think we got a good picture of where we’re at right now.’

Other lawmakers see the package in its current form as a no-brainer to pass.

Sen. John Kennedy, R-La., said that if amendments were offered to keep spending that he agreed with, he could find himself supporting tweaks to the package. But he challenged his colleagues to reject a spending cut package that ultimately amounted to less than half a percent of the nation’s entire budget.

‘This is gut check time for our Republican colleagues,’ he said. ‘They either believe in reducing spending or they don’t. They either believe in spending porn or they don’t, and I’ve listened to my colleagues, especially in the last 100 plus days, talk about how great DOGE was. Well, now is the chance to show it.’ 

This post appeared first on FOX NEWS

Let’s talk about language. Because in politics, language isn’t just what you say — it’s what people hear. And if there’s one thing I’ve learned from decades of helping brands and campaigns get their words right, it’s this: the wrong message can kill even the best idea. Tesla CEO Elon Musk’s America Party is a case study in how not to build trust through language.  

I’ve seen this movie before. I started my career on Ross Perot’s campaign, where we learned firsthand how the right words can electrify a movement — and how quickly the wrong ones can turn hope into skepticism. Perot’s success was based on his ability to connect with voters using language that was clear, relatable and believable. He spent a lot of time talking about a broken system, but he did so in a way that made people believe change was possible.  

Musk, on the other hand, is using the language of disruption without understanding the language of trust. And that’s why his America Party is likely to be just another blip in the long history of failed third-party efforts.  

The language of disruption vs. the language of trust  

Let’s break down Musk’s messaging. He says it’s ‘time for a new political party that actually cares about the people.’ He talks about ‘reducing government spending,’ dismantling regulatory bloat, and embracing AI-driven modernization. These are buzzwords, not beliefs. They’re designed to provoke, not persuade.  

Here’s the problem: Americans are already drowning in distrust. They don’t believe politicians. They don’t believe in institutions. And they certainly don’t believe that this billionaire with a Twitter habit is suddenly going to care about the people. Musk’s words are meant to sound populist, but they just sound AI-generated.  

Slogans can help build trust but trust cannot be built on slogans alone. It’s built on language that resonates, connects to people’s real concerns and is grounded in actions that create credibility. Perot was also a billionaire, but he understood how to speak the language of the average person and make it feel real.    

Musk, by contrast, is speaking at people, not to them.  

The pitfalls of start-up populism  

Musk’s messaging is heavy on tech jargon and light on empathy. AI-driven modernization might excite Silicon Valley, but it’s a scary prospect for many voters increasingly worried about their job, their healthcare or their kids’ future.    

Start-up language is sexy … if you’re a venture capitalist. But Musk doesn’t understand that most Americans don’t speak the language of technology.    

Perot was also a tech entrepreneur, but he left talk of mainframes out of his campaign. His version of reducing regulatory bloat was much simpler: ‘if you see a snake, just kill it — don’t appoint a committee on snakes.’  

I care for you. You’re fired  

We once had a client who wanted to test a campaign designed to show how much they cared about their customers. The slogan: ‘We care.’ As we expected, it bombed in testing. The company’s actions did not support the message. The same is true for Musk.  Musk says he wants a party that ‘actually cares about the people.’ But the language he uses doesn’t show care — it shows calculation. It’s the language of someone who wants to be seen as a disruptor, not someone who wants to build trust.  

Words like ‘disruption,’ ‘modernization,’ and ‘efficiency’ are the language of business (and often of layoffs), not the language of belonging. They don’t answer the fundamental question every voter is asking: ‘Do you understand me? Do you care about what I care about?’ If you can’t answer that in your messaging, you’ve already lost.  

The bottom line: Words matter more than ever  

It’s unclear if Musk is really serious about building something new or just tearing down something Trump. But if he wants to build a movement, he needs to do more than talk about what’s wrong.  That’s the easy part.   

Perot also said the system was broken. But he made the problem understandable and he made a solution seem achievable. He made the deficit real. He made government waste personal. He made it feel like we could all roll up our sleeves and fix it. Ultimately, he had his own issues, but at the peak of his campaign, 39% of the population said they planned to vote for him.

So much has changed since 1992, but building a third party in America remains one of the hardest jobs in politics. The only way to even start to make it work is to find language that creates hope, engenders optimism and illuminates a path to overcoming challenges that a significant plurality of Americans care about.    

Ironically, in the same poll that showed Perot leading the race, 65% of the public said they would be less likely to vote for a candidate who ‘made a fortune doing business with the federal government.’ So maybe less has changed than we think.   

This post appeared first on FOX NEWS

President Donald Trump told donors in 2024 he had cautioned Russian President Vladimir Putin that bombs would drop on Moscow if the Russian leader invaded Ukraine, a new book claims. 

The book, ‘2024: How Trump Retook the White House and the Democrats Lost America,’ was published on Tuesday and chronicles how Trump secured his victory in the November 2024 election, and how former President Joe Biden’s team dismissed concerns about his age in the campaign cycle. 

According to the book, Trump told donors that he’d issued a harsh warning to Putin about any potential invasion. Additionally, he said he’d issued a similar warning to Chinese President Xi Jinping, should the Chinese leader invade Taiwan, the book said. 

‘I was with Putin and I told him, ‘Vladimir, if you do it, we’re going to bomb the s— out of Moscow,’’ Trump revealed, according to an audio recording, also shared with CNN. ‘‘If you go into Taiwan, I’m going to bomb the s— out of Beijing.’ He thought I was crazy… He didn’t believe me either, except 10 percent. And 10 percent is all you need.’ 

In response, the White House said that Russia only invaded Ukraine in February 2022 — after Trump’s first term in office. 

‘As President Trump has said time and again, Russia never dared invade Ukraine when he was in office. It happened only when Biden was in office,’ White House spokesperson Anna Kelly said in a Wednesday statement. ‘Thanks to this President’s leadership, America is once again the leader of the free world, and peace through strength is restored. President Trump won on an America First agenda, and he is working hard to implement the mandate the American people gave him.’

The White House did not immediately respond to a request for comment from Fox News Digital confirming the authenticity of the audio. 

The book ‘2024’ is one of several that have been released in 2025 detailing how Trump secured victory in the 2024 election and how Biden’s mental acuity declined. It is authored by Josh Dawsey of the Wall Street Journal, Tyler Pager of the New York Times and Isaac Arnsdorf of the Washington Post. 

The authors did not immediately respond to a request for comment from Fox News Digital. 

Trump has recently voiced frustration with Putin as he’s sought to bring an end to the war between Russia and Ukraine. Tuesday, Trump said during a Cabinet meeting he was fed up with Putin and said he was eyeing potentially imposing new sanctions on Russia. 

‘We get a lot of bulls— thrown at us by Putin, if you want to know the truth. He’s very nice all the time, but it turns out to be meaningless,’ Trump said Tuesday. 

Fox News’ Sarah Tobianski contributed to this report. 

This post appeared first on FOX NEWS

Department of Justice leaders are facing sharp criticism and resignation calls from a faction of their supporters after they ended their inquiry into Jeffrey Epstein’s sex trafficking case without releasing new files.

The outrage, emanating largely from the right, can be tied to several past instances when those same leaders and other Republicans with large platforms once promoted the existence of incriminating, nonpublic Epstein case files, including a supposed list of sexual predators who were his clients.

Attorney General Pam Bondi, FBI Director Kash Patel and FBI Deputy Director Dan Bongino now say they have nothing further to share with the public about Epstein’s case.

In a joint, unsigned memo, the DOJ and FBI said Monday that after an exhaustive inquiry uncovering 300 gigabytes’ worth of material related to Epstein’s case, they found no signs of illegal activity by any new third parties. 

‘We did not uncover evidence that could predicate an investigation against uncharged third parties,’ the memo read.

The memo stated that ‘much of the material’ related to the Epstein case was subject to court-ordered seals, prohibiting the DOJ from releasing it. The client list, a point of significant discourse, does not exist, the memo said.

Some of President Donald Trump’s supporters and Patel’s and Bongino’s massive fan bases are now making it clear that they expected more. Below are 10 possible reasons for that.

1. Kash Patel said House Republicans should release ‘Epstein’s list’ of ‘pedophiles.’ 

Right-wing commentator Benny Johnson asked Patel why the government had not released information about Epstein’s purported clients, according to a clip Johnson shared in December 2023, before Patel became FBI director.

‘Simple, because of who’s on that list,’ Patel replied. ‘You don’t think that Bill Gates is lobbying Congress night and day to prevent the disclosure of that list?’

Patel criticized the Republican-led House for failing to obtain ‘Epstein’s list.’

 ‘What the hell are the House Republicans doing? They have the majority. You can’t get the list?’ Patel asked, later adding, ‘We can’t even get basic documents out. This is why America hates Congress.’

‘Put on your big boy pants, and let us know who the pedophiles are,’ Patel said.

2. Kash Patel told Glenn Beck that the FBI director has ‘direct control’ of Epstein’s address book.

In an interview in December 2023, Patel addressed questions from BlazeTV host Glenn Beck about Epstein’s ‘black book.’ Patel said the FBI had the book.

‘That’s under direct control of the director of the FBI,’ the now-FBI director said.

Patel added, ‘That’s a thing I think President Trump should run on. On day one, roll out the black book.’

Epstein’s address books have long been a point of scrutiny. His house manager tried to sell one, according to a 2009 FBI affidavit. Gawker published one of the address books in 2015 with phone numbers redacted. That version contains hundreds of both well-known and obscure names. A judge allowed one of the address books to be entered under seal into the court record during his associate Ghislain Maxwell’s sex trafficking trial in 2021.

3. Trump told Fox News during his campaign that he plans to release the Epstein files.

When asked on ‘Fox & Friends Weekend’ last year if Trump would ‘declassify the Epstein files’ if he were elected president, Trump replied that he would.

‘Yeah, yeah I would. I guess I would,’ Trump said. ‘I think less so because you don’t know, you don’t want to affect people’s lives if it’s phony stuff in there, because there’s a lot of phony stuff with that whole world, but I think I would.’

On Tuesday during a Cabinet meeting, Trump brushed off the topic of Epstein when asked by a reporter about him.

‘Are people still talking about this guy, this creep?’ Trump said. ‘That is unbelievable.’

4. Rep. Marjorie Taylor Greene, R-Ga., insisted there is a ‘list,’ even after the Bondi-led DOJ said otherwise.

‘What about her little black book? The 97-page book, contains the names and contact details of almost 2,000 people including world leaders, celebrities and businessmen,’ Rep. Marjorie Taylor Greene wrote this week on X. ‘No one believes there is not a client list.’

The Miami Herald’s Julie Brown, who followed and reported on Epstein’s case for years, has said claims about the list are dubious.

‘There is no client list that I am aware of. My theory is it was something conspiracy theorists cooked up to monetize their podcasts online,’ Brown wrote in response to social media users in 2024.

5. Sen. Marsha Blackburn, R-Tenn., claimed ‘Epstein’s client list’ was ‘key to helping us crack this trafficking ring wide open.’

Sen. Marsha Blackburn has made the release of the Epstein files one of her top priorities over the past couple of years.

From promoting anticipated disclosures on the Senate floor to posting dozens of times about the matter on social media, Blackburn has vowed that ‘accountability for these predators is coming.’

‘Epstein’s client list and the information I requested to reveal his associates & business dealings are key to helping us crack this trafficking ring wide open,’ Blackburn wrote on social media in February.

Ahead of the DOJ releasing a small tranche of files in February, Blackburn said ‘this will be a ‘phase 1’ release. There will be more to come.’

The Trump administration first released that batch of information, which contained no new revelations, in February to right-wing social media influencers. They appeared in photos at the White House with binders the Trump administration gave them that were labeled ‘classified’ and ‘Epstein files: Phase 1.’

Blackburn also secured a promise from Patel during his confirmation hearing this year that he would publish Epstein files.

6. Bondi suggested an Epstein list was on her desk.

Bondi was asked by host John Roberts during a Fox News interview in February if she planned to release a ‘list of Epstein’s clients.’

‘It’s sitting on my desk right now to review,’ Bondi said. ‘That’s been a directive by President Trump. I’m reviewing that.’

Bondi clarified her remarks during the Cabinet meeting with Trump on Tuesday, saying she was referencing Epstein’s entire case file.

‘In February, I did an interview on Fox, and it’s been getting a lot of attention because I said, I was asked a question about the client list, and my response was, ‘It’s sitting on my desk to be reviewed,’ meaning the [Epstein] file along with the JFK and MLK files, as well,’ Bondi said. ‘That’s what I meant by that.’

7. Bondi told Sean Hannity that the DOJ has a ‘truckload’ of Epstein evidence.

After the initial document release flopped, Bondi falsely said the FBI’s New York office was intentionally withholding documents from her.

During an interview with Fox News’s Sean Hannity in March, Bondi claimed a ‘source’ told her the case files were in New York, where Epstein was indicted in 2019.

‘I gave them a deadline of Friday at 8 a.m. to get us everything, and a source had told me where the documents were being kept, Southern District of New York, shock,’ Bondi said. ‘So we got them all by, hopefully all of them, Friday at 8 a.m., thousands of pages of documents.’

‘Director Patel is going to get us a detailed report as to why the FBI withheld all of those documents,’ Bondi said, adding that a ‘truckload of evidence arrived’ at the DOJ after she requested the documents from New York.

The attorney general then went on a tirade about transparency and again questioned why the case files were in New York.

8. Bongino told his podcast listeners the ‘Epstein client list is a huge deal.’ There is ‘a reason they’re hiding it,’ he said.

Bongino predicted on his podcast in September 2024 that the ‘Epstein client list,’ which he now says does not exist, ‘is going to rock the Democrat Party.’

‘Folks, the Epstein client list is a huge deal,’ Bongino said.

‘The reason the Epstein client list being revealed is so important is because I want you to understand that there is a class of bekightened folks … who are not subjected to the same rules you are,’ Bongino said.

The former podcast star warned, ‘Folks, you’re going to see a lot of names on that. … It’s going to rock the political world. There’s a reason they’re hiding it.’

Bongino pushed the theory that Epstein’s death in 2019 in his jail cell was not a suicide, despite the DOJ inspector general and a medical examiner saying it was.

Epstein ‘is deceased under, at a minimum, suspicious circumstances,’ Bongino said.

In the FBI and DOJ’s new memo, they concluded that Epstein’s death was caused by suicide.

9. Bondi said she was briefed on the Epstein files and could not talk about them.

Bondi told Benny Johnson in February that she was briefed about the matter and unable to comment on it.

Johnson asked, ‘Where are we at with the Jeffrey Epstein list? The documents? And Kash has made a lot of public statements about this.’

‘I was briefed on that yesterday,’ Bondi said. ‘I can’t talk about that publicly. But, President Trump has given a very strong directive, and that’s going to be followed.’

10. Patel said in November that ‘restoring trust’ in federal agencies could include giving the public the ‘Epstein list.’ 

Patel told told Johnson last November that what is ‘most important’ is ‘restoring trust in our agencies and departments.’

‘The way to do that is to literally give the American people the truth,’ Patel said. ‘And that’s what they feared about Donald Trump. He’s going to come in there and maybe give them the Epstein list and maybe give them the P. Diddy list … and they are terrified.’

Epstein was indicted in 2019 for allegedly recruiting dozens of women and minors as young as 14 and engaging in sexual relations with them at his lavish homes in Florida, New York and elsewhere. He allegedly sexually abused some of them.

He died after being found unresponsive in his prison cell in New York City in 2019. Maxwell, his associate, was convicted of conspiring to sexually abuse minors and sentenced to 20 years in prison. She has an appeal in her case pending.

This post appeared first on FOX NEWS

 

   New Expansion Hole Intersects    279    Metres Averaging    0.49    % Cu   

 

   Nine Drill Rigs Now Active on Site   

 

Osisko Metals Incorporated (the ‘ Company or ‘ Osisko Metals ‘) ( TSX-V: OM ; OTCQX: OMZNF ; FRANKFURT: 0B51 ) is pleased to announce new drill results from the Gaspé Copper Project, located in the Gaspé Peninsula of Eastern Québec.

 

 Osisko Metals Chief Executive Officer Robert Wares commented: ‘Today’s new results continue to confirm the large-scale potential of mineralization at Gaspé Copper. Expansion hole 30-1090 in particular has intersected a significant mineralized width, underscoring the excellent prospects for increasing the size of the known deposit towards the south. The program is advancing well, with a ninth drill rig added recently to accelerate the definition and expansion program.’

 

Significant new analytical results are presented below and include 25 mineralized intercepts from eight drill holes (Table 1). The infill intercepts are all located inside the defined 2024 Mineral Resource Estimate model (‘MRE’, see November 14, 2024 news release ), and are focused on upgrading inferred mineral resources to measured or indicated categories, as applicable. The expansion intercepts are all located outside the 2024 MRE model and may lead to additional resources that will be classified appropriately within the next MRE update. Maps showing hole locations are available at www.osiskometals.com .

 

 

 

 

 

   Highlights:   

 

  • Drill hole 30-1090
    •   279.0   metres averaging 0.49% Cu (expansion)
    •  

    •   108.0 metres averaging 0.84% Cu (expansion)
    •  

  •  

  • Drill hole 30-1078
    •   256.5   metres averaging 0.25   % Cu (infill)
    •  

    •   381.0   metres averaging 0.22   % Cu (expansion)
    •  

  •  

  • Drill hole 30-1079
    •   319.5   metres averaging 0.28   % Cu (infill)
    •  

    •   180.0   metres averaging 0.37   % Cu (expansion)
    •  

  •  

  • Drill hole 30-1081
    •   301.8   metres averaging 0.41% Cu (infill)
    •  

    •   44.5   metres averaging 0.23   % Cu (expansion)
    •  

  •  

  • Drill hole 30-1084
    •   471.4   metres averaging 0.25   % Cu (infill)
    •  

    •   55.4   metres averaging 0.33   % Cu (expansion)
    •  

    •   89.7   metres averaging 0.29   % Cu (expansion)
    •  

  •  

  • Drill hole 30-1080
    •   520.5   metres averaging 0.23   % Cu (infill)
    •  

    •   195.0   metres averaging 0.26   % Cu (expansion)
    •  

  •  

  Table 1: Infill and Expansion Drilling  

 

                                                                                                                                                                                                                                                                                       

  DDH No.     From (m)     To (m)     Width (m)     Cu %     Ag g/t     Mo %     CuEq*     Type  
  30-1077     129.0     201.0     72.0     0.22     2.71        0.24     Infill  
  And     291.0     313.5     22.5     0.23     2.62     0.009     0.28     Infill  
  And     384.0     399.0     15.0     0.52     3.73        0.55     Infill  
  And     428.5     450.7     22.2     0.30     2.33     0.006     0.34     Infill  
  And     481.5     553.5     72.0     0.19     1.41     0.013     0.25     Expansion  
  And     603.8     777.0     173.2     0.27     1.49     0.035     0.42     Expansion  
  30-1078     6.0     262.5     256.5     0.25     1.79     0.008     0.29     Infill  
  And     307.5     688.5     381.0     0.22     1.69     0.022     0.32     Expansion  
  30-1079     22.5     342.0     319.5     0.28     2.14     0.008     0.32     Infill  
  And     456.0     636.0     180.0     0.37     2.54     0.007     0.41     Expansion  
   (Including)       480.7       481.8       1.1       8.66       35.2           8.84     Expansion  
  30-1080     15.0     535.5     520.5     0.23     1.02     0.013     0.29     Infill  
  And     774.0     969.0     195.0     0.26     1.28     0.030     0.39     Expansion  
  30-1081     42.0     71.0     29.0     0.16     1.79        0.18     Infill  
  And     94.0     395.8     301.8     0.41     3.36     0.006     0.45     Infill  
   (Including)       322.3       330.0       7.7       1.99       14.58           2.08     Infill  
  And     445.5     490.0     44.5     0.23     1.32        0.28     Expansion  
  30-1084     5.6     477.0     471.4     0.25     1.95     0.009     0.30     Infill  
  And     522.6     578.0     55.4     0.33     2.64     0.041     0.51     Expansion  
  And     616.8     706.5     89.7     0.29     1.93     0.012     0.35     Expansion  
  30-1086     14.1     166.5     152.4     0.18     0.73        0.19     Infill  
  And     219.0     250.5     31.5     0.22     1.13        0.23     Infill  
  And     433.1     466.5     33.4     0.25     1.12        0.26     Infill  
  And     888.5     949.5     61.0     0.23     0.98     0.009     0.27     Expansion  
  30-1090     15.0     294.0     279.0     0.49     3.35        0.51     Expansion  
   (Including)       66.0       72.0       6.0       3.34       14.42       0.019      3.49     Expansion  
   (Including)       164.0       172.7       8.7       2.24       9.78           2.29     Expansion  
  And     331.5     357.0     25.5     0.24     1.96        0.26     Expansion  
  And     417.0     525.0     108.0     0.84     7.79        0.89     Expansion  
   (Including)      433.4     445.3     11.9     3.00     30.46        3.20     Expansion  

 

 
Notes: Please see explanatory notes below on copper equivalent values and Quality Assurance / Quality Control.

 

  Table 2: Drill hole locations  

 

                                                               

  DDH No.     Azimuth (°)     Dip (°)     Length (m)     UTM E     UTM N     Elevation  
  30-1077     0     -90     879     316400     5425987.8     637.7  
  30-1078     0     -90     837     316300     5425903     608.4  
  30-1079     0     -90     780     316298     5425814     584.3  
  30-1080     0     -90     976     315500     5426425     580.0  
  30-1081     0     -90     490     316505     5425800     584.9  
  30-1084     0     -90     816     316397     5425889     606.9  
  30-1086     0     -90     978     315500     5426320     580.0  
  30-1090     0     -90     675     316477     5425532     565.7  

 

 
Drill hole 30-1090 intersected new mineralization located 105 metres south of the 2024 MRE model, returning 279.0 metres averaging 0.49% Cu and 3.35 g/t Ag   (including   8.7 metres averaging   2.24% Cu and 9.8 g/t Ag) ; a second intercept in this same hole (below the base of the 2024 MRE model) returned 108 metres averaging   0.84% Cu and 7.79 g/t Ag , extending mineralization to a vertical depth of 525 metres.

 

Drill hole 30-1078 (located in the south-central deposit) intersected 256.5 metres averaging 0.25% Cu and 1.79 g/t Ag , followed by a second intercept of 381.0 metres averaging 0.22% Cu and 1.69 g/t Ag , extending mineralization 280 metres below the base of the 2024 MRE model to a vertical depth of 688 metres.

 

Drill hole 30-1079 (located in the south-central deposit) intersected 319.5 metres averaging 0.28% Cu and 2.14 g/t Ag , followed by a second intercept of 180.0 metres averaging 0.37% Cu and 2.54 g/t Ag , extending mineralization 307 metres below the base of the 2024 MRE model to a vertical depth of 636 metres.

 

Drill hole 30-1081 (located in the south-central deposit) intersected 301.8 metres averaging 0.41% Cu and 3.36 g/t Ag (   including 7.7 metres averaging 1.99% Cu and 14.6 g/t Ag    at the level of the C Zone skarn ), followed by a second intercept of 44.5 metres averaging   0.23% Cu and 1.32 g/t Ag, extending mineralization 146 metres below the base of the 2024 MRE model to a vertical depth of 490 metres.

 

Drill hole 30-1084, also located in the south-central portion of the deposit, intersected 471.4 metres averaging 0.25% Cu and 1.95 g/t Ag, followed by a second intercept at depth of 55.4 metres averaging   0.33% Cu and 2.64 g/t Ag, and a third deeper intercept of 89.7 metres averaging   0.29% Cu and 1.93 g/t Ag, extending mineralization 306 metres below the base of the 2024 MRE model to a vertical depth of 706 metres.

 

Drill hole 30-1080 (located at the northwest end of the deposit) intersected 520.5 metres averaging 0.23% Cu and 1.02 g/t Ag , followed by a second intercept of 195.0 metres averaging   0.26% Cu and 1.28 g/t Ag , extending mineralization 418 metres below the base of the 2024 MRE model to a vertical depth of 969 metres.

 

Mineralization occurs as disseminations and veinlets of chalcopyrite and is mostly stratigraphically controlled in the area of Needle Mountain, Needle East, and Copper Brook. High molybdenum grades (up to 0.4% Mo) were locally obtained in both the C Zone and E Zone skarns. At least five vein/stockwork mineralizing events have been recognized at Copper Mountain, which overprint earlier skarn/porcellanite-hosted mineralization throughout the Gaspé Copper system.

 

The 2022 to 2024 Osisko Metals drill programs were focused on defining open-pit resources within the Copper Mountain stockwork mineralization ( see    May 6, 2024 MRE press release   ). Extending the resource model south of Copper Mountain into the poorly-drilled primary skarn/porcellanite portion of the system subsequently led to a significantly increased resource, mostly in the Inferred category ( see    November 14, 2024 MRE press release   ).

 

The current drill program is designed to convert of the November 2024 MRE to Measured and Indicated categories, as well as test the expansion of the system deeper into the stratigraphy and laterally to the south and southwest towards Needle East and Needle Mountain respectively.

 

All holes were drilled sub-vertically into the altered calcareous stratigraphy, which dips 20 to 25 degrees to the north. The L1 (C Zone) the L2 (E Zone) skarn/marble horizons were intersected in most holes, as well as intervening porcellanites (pale green to white potassic-altered hornfels) that host the bulk of the disseminated copper mineralization.

 

The November 2024 MRE was limited at depth to the base of the L1 skarn horizon (C Zone), and all mineralized intersections below this horizon represent potential depth extensions to the deposit, to be included in the next scheduled MRE update in Q1 2026.

 

   Explanatory note regarding copper-equivalent grades   

 

  Copper Equivalent grades are expressed for purposes of simplicity and are calculated taking into account: 1) metal grades; 2) estimated long-term prices of metals: US$4.00/lb copper, $20.00/lb molybdenum and US$24/oz silver; 3) estimated recoveries of 92%, 70% and 70% for Cu, Mo and Ag respectively; and 4) net smelter return value of metals as percentage of the price, estimated at 86.5%, 90.7% and 75.0% for Cu, Mo and Ag respectively.  

 

   Qualified Person   

 

  The scientific and technical content of this news release has been reviewed, prepared, and approved by Mr. Bernard-Olivier Martel, P. Geo. (OGQ 492), an independent consultant, is at ‘qualified person’ as defined by National Instrument 43-101 – Standards of Disclosure for Mineral Projects (‘NI 43-101’).  

 

   Quality Assurance / Quality Control   

 

  Mineralized intervals reported herein are calculated using an average 0.12% copper lower cut-off over contiguous 20-metre intersections (shorter intervals as the case may be at the upper and lower limits of reported intervals). Intervals of 20 metres or less are reported unless indicating significantly higher grades . True widths are estimated at 90 – 92% of the reported core length intervals.

 

  Osisko Metals adheres to a strict QA/QC program for core handling, sampling, sample transportation and analyses, including insertion of blanks and standards in the sample stream. Drill core is drilled in HQ or NQ diameter and securely transported to its core processing facility on site, where it is logged, cut and sampled. Samples selected for assay are sealed and shipped to ALS Canada Ltd.’s preparation facility in Sudbury. Sample preparation details (code PREP-31DH) are available on the ALS Canada website. Pulps are analyzed at the   ALS   Canada   Ltd.   facility   in   North   Vancouver,   BC.   All   samples   are   analyzed   by   four   acid   digestion followed by both ICP-AES and ICP-MS for copper, molybdenum and silver.  

 

   About Osisko Metals   

 

  Osisko Metals Incorporated is a Canadian exploration and development company creating value in the critical metals sector, with a focus on copper and zinc. The Company acquired a 100% interest in the past-producing Gaspé Copper mine from Glencore Canada Corporation in July 2023. The Gaspé Copper mine is located near Murdochville in Québec    s Gaspé Peninsula. The Company is currently focused on resource expansion of the Gaspé Copper system, with current    Indicated Mineral Resources of     824 Mt averaging 0.34% CuEq and Inferred Mineral Resources of 670 Mt averaging 0.38% CuEq    (in compliance with NI 43-101). For more information, see Osisko Metals’ November 14, 2024 news release entitled ‘Osisko Metals Announces Significant Increase in Mineral Resource at Gaspé Copper’. Gaspé Copper hosts the largest undeveloped copper resource in eastern North America, strategically located near existing infrastructure in the mining-friendly province of Québec.  

 

  In addition to the Gaspé Copper project, the Company is working with Appian Capital Advisory LLP through the Pine Point Mining Limited joint venture to advance one of Canada    s largest past-producing zinc mining camps, the Pine Point project, located in the Northwest Territories. The current mineral resource estimate for the Pine Point project consists of    Indicated Mineral Resources of 49.5 Mt averaging 5.52% ZnEq and Inferred Mineral Resources of 8.3 Mt averaging 5.64% ZnEq    (in compliance with NI 43-101). For more information, see Osisko Metals    June 25, 2024 news release entitled ‘Osisko Metals releases Pine Point mineral resource estimate: 49.5 million tonnes of indicated resources at 5.52% ZnEq’. The Pine Point project is located on the south shore of Great Slave Lake, Northwest Territories, close to infrastructure, with paved road access, an electrical substation and 100 kilometers of viable haul roads.  

 

  For further information on this news release, visit    www.osiskometals.com ,   or contact:  

 

Don Njegovan, President
Email: info@osiskometals.com  
Phone: (416) 500-4129

 

   Cautionary Statement on Forward-Looking Information   

 

  This news release contains ‘forward-looking information’ within the meaning of applicable Canadian securities legislation based on expectations, estimates and projections as at the date of this news release. Any statement that involves predictions, expectations, interpretations, beliefs, plans, projections, objectives, assumptions, future events or performance (often, but not always, using phrases such as ‘expects’, or ‘does not expect’, ‘is expected’, ‘interpreted’, ‘management’s view’, ‘anticipates’ or ‘does not anticipate’, ‘plans’, ‘budget’, ‘scheduled’, ‘forecasts’, ‘estimates’, ‘potential’, ‘feasibility’, ‘believes’ or ‘intends’ or variations of such words and phrases or stating that certain actions, events or results ‘may’ or ‘could’, ‘would’, ‘might’ or ‘will’ be taken, occur or be achieved) are not statements of historical fact and may be forward-looking information and are intended to identify forward-looking information. This news release contains forward-looking information pertaining to, among other things: the tax treatment of the FT Units; the timing of incurring the Qualifying Expenditures and the renunciation of the Qualifying Expenditures; the ability to advance Gaspé Copper to a construction decision (if at all); the ability to increase the Company’s trading liquidity and enhance its capital markets presence; the potential re-rating of the Company; the ability for the Company to unlock the full potential of its assets and achieve success; the ability for the Company to create value for its shareholders; the advancement of the Pine Point project; the anticipated resource expansion of the Gaspé Copper system and Gaspé Copper hosting the largest undeveloped copper resource in eastern North America.  

 

  Forward-looking information is not a guarantee of future performance and is based upon a number of estimates and assumptions of management, in light of management’s experience and perception of trends, current conditions and expected developments, as well as other factors that management believes to be relevant and reasonable in the circumstances, including, without limitation, assumptions about: the ability of exploration results, including drilling, to accurately predict mineralization; errors in geological modelling; insufficient data; equity and debt capital markets; future spot prices of copper and zinc; the timing and results of exploration and drilling programs; the accuracy of mineral resource estimates; production costs; political and regulatory stability; the receipt of governmental and third party approvals; licenses and permits being received on favourable terms; sustained labour stability; stability in financial and capital markets; availability of mining equipment and positive relations with local communities and groups. Forward-looking information involves risks, uncertainties and other factors that could cause actual events, results, performance, prospects and opportunities to differ materially from those expressed or implied by such forward-looking information. Factors that could cause actual results to differ materially from such forward-looking information are set out in the Company’s public disclosure record on SEDAR+ (www.sedarplus.ca) under Osisko Metals’ issuer profile. Although the Company believes that the assumptions and factors used in preparing the forward-looking information in this news release are reasonable, undue reliance should not be placed on such information, which only applies as of the date of this news release, and no assurance can be given that such events will occur in the disclosed time frames or at all. The Company disclaims any intention or obligation to update or revise any forward- looking information, whether as a result of new information, future events or otherwise, other than as required by law.  

 

  Neither the TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this release.  

 

Photos accompanying this announcement are available at:

 

  https://www.globenewswire.com/NewsRoom/AttachmentNg/9056bd4b-e68d-4dd1-a787-1f3b346d2cde  

 

  https://www.globenewswire.com/NewsRoom/AttachmentNg/3e9ed8b2-4c21-47aa-9923-f5e30da77ff4  

 

   

 

 

News Provided by GlobeNewswire via QuoteMedia

This post appeared first on investingnews.com

Mark O’Byrne, managing director at Tara Coins, shares his outlook for gold and silver.

He sees much higher prices long term and expects gold to rise to at least US$10,000 per ounce; for silver, O’Byrne believes US$100 to US$150 per ounce is a ‘conservative’ target.

Securities Disclosure: I, Charlotte McLeod, hold no direct investment interest in any company mentioned in this article.

This post appeared first on investingnews.com

Silver is a notoriously volatile metal capable of wide price swings in either direction. However, the metal is also seen by many as a safe-haven investment and a hedge against inflation.

While investing in silver bullion is one popular method for gaining exposure, silver-mining companies offer another route.

Silver-mining companies with strong balance sheets and experienced management teams are able to capitalize on high silver prices and weather the storm of low silver prices. Some of the most profitable silver-mining companies are even able to offer investors dividends, which may be appealing for those who are in it for the long haul.

Dividends are especially attractive in the often-unstable mining sector because they give investors a degree of security — if a company pays a dividend, it generally feels that it has the cash to do so and believes it will have the ongoing profits it needs to keep those payments coming.

There are several dividend-paying silver stocks for investors to choose from. The companies below are ordered by dividend yield, and all data is current as of June 19, 2025.

1. Fresnillo (LSE:FRES,OTC Pink:FNLPF)

LSE market cap: GBP 10.66 billion
Dividend yield: 1.71 percent

Major miner Fresnillo bills itself as the world’s leading primary silver producer and a significant gold producer. Its precious metals operations are all located in Mexico, including the Fresnillo mine, which is the largest primary silver mine in the world. It also holds a portfolio of exploration prospects in the country and silver streaming contracts.

Fresnillo’s attributable output from its mines for the full 2024 year came to 56.3 million ounces of silver and 610,646 ounces of gold. The company’s reported mine production for the the first quarter of 2025 comes to 12.4 million ounces of silver and 156,100 ounces of gold.

Dividends from the company are paid in pounds sterling unless shareholders elect to be paid in US dollars. This silver stock pays two dividends per year, with the dividend split unevenly between the two; one third is paid in the interim dividend and two-thirds in the final dividend. Its dividend policy takes business profitability and underlying earnings growth into account, as well as capital requirements and cash flow.

Most recently, Fresnillo paid its 2024 final dividend of 19.6521 pence, or US$0.261, on May 30, 2025. Additionally, due to its 2024 financial performance, including revenue growth of 26.9 percent, the company paid a special one-off dividend of 31.4736 pence, or US$0.418 per share, the same day. This made 2024 Fresnillo’s highest recorded dividend payout year yet.

2. Pan American Silver (TSX:PAAS,NYSE:PAAS)

TSX market cap: C$14.39 billion
NYSE market cap: US$10.55 billion
Dividend yield: 1.41 percent

Founded by Ross Beaty in 1994, Pan American Silver currently operates four primary silver mines, which are located in Mexico, Peru, Bolivia and Argentina. It also has a portfolio of gold mines produce silver as a by-product.

The company’s 2024 silver production came in at 21.1 million ounces alongside 892,000 ounces of gold. For Q1 this year, output reached a total of 5 million ounces of silver and 182,200 ounces of gold.

In May, Pan American announced a definitive agreement to acquire silver producer MAG Silver (TSX:MAG,NYSEAMERICAN:MAG), which owns a 44 percent interest in the large-scale, high-grade Juanicipio mine, operated by Fresnillo.

The highest dividend Pan American has ever paid is US$0.125 per share, and it was able to pay a dividend of that amount a noteworthy nine times in a row between March 18, 2013, and March 13, 2015. The silver stock paid its most recent quarterly dividend on June 2, 2025, at US$0.10 per share.

3. Wheaton Precious Metals (TSX:WPM,NYSE:WPM)

TSX market cap: C$56.63 billion
NYSE market cap: US$41.58 billion
Dividend yield: 0.71 percent

Wheaton Precious Metals is a well-known name in the silver space largely because of its business model — it is the world’s biggest precious metals streaming company.

Streaming companies operate differently from miners, making upfront payments to a variety of metals companies in order to gain the right to purchase all or a portion of their metal production at a low, fixed cost.

The company currently has streaming agreements in place for 18 operating mines and 28 development-stage projects. It is interested in companies operating in politically stable jurisdictions, and states that its value should rise with the price of silver and gold. As a result, Wheaton sees itself offering investors multiple benefits while reducing many of the downside risks that traditional miners face.

Wheaton pays a quarterly dividend. So far in 2025, it has already made two dividend payments of US$0.165 per share, with the latest payment on June 10, 2025.

4. Silvercorp Metals (TSX:SVM)

TSX market cap: C$1.29 billion
NYSE market cap: US$950.85 million
Dividend yield: 0.59 percent

Silvercorp Metals operates the Gaocheng and Ying silver-mining operations in China, and is also focused on acquiring and growing underdeveloped projects with high upside.

Its silver production for its 2025 fiscal year ended March 31 came in at approximately 6.95 million ounces, and the company also produced 7,495 ounces of gold. The company’s 2026 production guidance is set at 7.38 million to 7.6 million ounces of silver and 9,100 to 10,400 ounces of gold.

Silvercorp offers shareholders a semiannual dividend, which it states is “based on a number of factors including commodity prices, market conditions, financial results, cash flows from operations, expected cash requirements and other relevant factors.” Its most recent dividend was paid on June 26, 2025, at a rate of US$0.0125 per share.

5. Hecla Mining Company (NYSE:HL)

NYSE market cap: US$3.76 billion
Dividend yield: 0.59 percent

Last on this list of silver stocks that pay dividends is Hecla Mining Company, which wholly owns and operates four mines and has a large exploration portfolio. The oldest precious metals miner in North America, Hecla is also the largest primary silver producer in the US and Canada and the third largest in the world.

In the US, Hecla operates the Greens Creek and Lucky Friday silver mines, located in Alaska and Idaho respectively. As for Canada, Hecla has the Keno Hill silver mine in the Yukon’s Keno Hill silver district, which is home to some of the world’s highest silver grades, as well as the Casa Berardi gold-silver mine in Québec.

Hecla reported 2024 production of 16.2 million ounces of silver, the second highest in the company’s history, and 142,000 ounces of gold. As for Q1 2025, the company produced 4.1 million ounces of silver and 34,242 ounces of gold.

Hecla pays an annual minimum common stock dividend, distributing it on a quarterly basis. Its dividends previously included a silver-linked component, but the company removed this in February 2025 in part to refocus the capital on growth opportunities.

Currently, the company’s annual minimum common stock dividend is set at US$0.015 per share, divided into quarterly payments of US$0.00375. Its most recent payment was on June 10, 2025.

Hecla also pays a quarterly US$0.875 per share dividend for its Series B cumulative convertible preferred stock, which it states is typically paid on January 1, April 1, July 1 and October 1.

FAQs for silver dividend stocks

What are dividend stocks?

Dividend stocks regularly pay a sum of money to a class of shareholders out of the company’s earnings. To qualify for a dividend payout, an investor must have owned the stock on the ex-dividend date.

Dividends are often issued as cash payments sent to a shareholder’s brokerage account, but can also be issued as stock or discounts on share purchases.

How to invest in dividend stocks?

You can invest in dividend-paying stocks through a stock broker or stock platform, and a stock broker can offer advice on how to take advantage of companies offering dividend programs. Some dividend stocks may also offer a dividend reinvestment program, allowing shareholders to automatically buy new shares with their dividends, either commission-free or at a reduced cost.

How much do dividend stocks pay?

A company’s board of directors is responsible for setting a dividend policy and will determine the size of the dividend payout based on the firm’s long-term revenue outlook.

The size of an individual shareholder’s dividend payout depends on the number of shares owned in that company. For example, if an investor owned 1,000 shares of Wheaton Precious Metals, which is currently paying a dividend of US$0.165 per share, they would get US$165 every quarter, totaling US$660 annually.

What silver ETFs pay dividends?

There are no physical backed Silver ETFs with dividends. However, ETFs that track dividend-paying silver stocks such as those listed above may offer the potential for dividend income. A few examples of are Global X Silver Miners ETF (ARCA:SIL), and iShares MSCI Global Silver and Metals Miners ETF (BATS:SLVP).

Securities Disclosure: I, Melissa Pistilli, hold no direct investment interest in any company mentioned in this article.

This post appeared first on investingnews.com